Type 1 and 1F	Type 2	Type 3 & 3F Extensions	Sling only
4" One Ply	11,400	12,500	-----------	11,400
4" Two Ply	25,000	25,000	12,500 each	25,000
6" One Ply	17,100	18,800	-----------	17,100
6" Two Ply	34,200	34,200	17,100 each	34,200
NOTE: Type 3 & 3F capacities are for each extension.

Flat Pin Eye Slings connected to Fork Sling Hardware.
Made in 4" and 6" widths. This type has shorter 6" long Pin Eyes. When extra eyes are not in use they stay out of the way. This type can also be connected or disconnected without pulling sling over the forks, however, the disconnect is a little higher to reach than Type 3.

Figure 1
Standard Hanger
PN: 180-300 will fit forks up to 9" wide and 8-1/2" high.

Figure 2
Loose Pin Shackle
Shackles are hot dip galvanized for corrosion resistance.
4" Shackle PN: 175-230
6" Shackle PN: 175-260

Figure 3
Extra Shortening Eye