Kirkpatrick Wire Rope Lubrication Systems
Dynagard Environmental Wire Rope Lubricants
Partners in Wire Rope Lubrication With:
Atlantic Cordage
Dynagard Environmental Wire Rope Lubricants
Partners in Wire Rope Lubrication With:
Atlantic Cordage
DYNAGARD BLUE™
(Environmentally Friendly Wire Rope Lubricant)
(Environmentally Friendly Wire Rope Lubricant)
Dynagard Blue is an extreme pressure unleaded environmental wire rope lubricant blended for excellent resistance to softening under severe working conditions, water resistance, and it’s compatibility with all Kirkpatrick Wire Rope Lubrication Systems in addition to manual hand application. Its slickness and viscosity allow it to stay alive with the wire rope as the strands move during load bearing operations. This attribute
also allows it to continuously redistribute itself to cover any internal strand areas that may have been missed during the initial lubrication process. An unleaded extreme pressure additive provides exceptional protection against wear and shock loads, while additional additives enhance resistance to water wash-off, protection against fling off at high wire rope travel speeds, and long service in high temperature environments. Dynagard Blue has outstanding structural and chemical stability. It won't corrode steel and copper bearing alloys and is compatible with conventional seal materials. Aquatic toxicity tests on sensitive marine organisms performed by
independent testing laboratories have shown it to have possibly the best LC-50 value of any wire rope lubricant marketed in the world. Copy of the test data is available upon request.
also allows it to continuously redistribute itself to cover any internal strand areas that may have been missed during the initial lubrication process. An unleaded extreme pressure additive provides exceptional protection against wear and shock loads, while additional additives enhance resistance to water wash-off, protection against fling off at high wire rope travel speeds, and long service in high temperature environments. Dynagard Blue has outstanding structural and chemical stability. It won't corrode steel and copper bearing alloys and is compatible with conventional seal materials. Aquatic toxicity tests on sensitive marine organisms performed by
independent testing laboratories have shown it to have possibly the best LC-50 value of any wire rope lubricant marketed in the world. Copy of the test data is available upon request.
DYNAGARD Blue Specifications:
- National Stock Number:
- MIL-PRF-18458C (Type I & Type II):
Meets or surpasses requirements
- LC50 Bio-Aquatic Rating, EPA/600/4-90/027:
Test duration: 48 Hour
Test specimen used: Mysidopsis Bahia - Viscosity:
- Color:
- Texture:
- Soap Type:
Hydroxystearate - Mineral Oil %:
- Oil Separation % (Fed 791-321.1):
- Penetration: mm, (ASTM D217):
- Viscosity, cST at 40 degrees Centigrade:
- Viscosity, cST at 100 degrees Centigrade:
- Dropping Point, C(F):
- Low Temperature Flexibility (Section 4.4.4, No cracks @ 6 Degrees C):
- Rust Test, ASTM D-1743:
- Salt Fog Corrosion Resistance ASTM B117:
- Salt Spray, Fed. Standard 791, TM 4001 (10 Days) :
- Accelerated Weathering (ASTM G152, 153) :
- Load Wear Index (ASTM D2596):
- Adhesive% (Sec. 4.6.6. 150 rpm @ 151 +/-2 deg. F):
- Volatile Matter (2.0% Max):
- 4-Weld, kg.:
- 4-Ball Wear Diameter, mm, max.:
9150-01-520-8116
Pass
(Over 25,000 ppm)
NLGI Grade 2
Blue
Smooth/Creamy
Lithium 12
50% Nominal
1.94%
305
320
21-23
177 C (350 F)
Pass
Pass
1,000 hr./Pass
Pass
Pass
34.43
99.7
1.02
250
0.65
Pass
(Over 25,000 ppm)
NLGI Grade 2
Blue
Smooth/Creamy
Lithium 12
50% Nominal
1.94%
305
320
21-23
177 C (350 F)
Pass
Pass
1,000 hr./Pass
Pass
Pass
34.43
99.7
1.02
250
0.65
