Type 1 and 1F CAP./LBS	Type 2 CAP./LBS	Type 3 & 3F Extensions CAP./LBS	Sling only CAP./LBS
4" One Ply	11,400	11,400	-----------	11,400
4" Two Ply	25,000	25,000	12,500 each	25,000
6" One Ply	17,100	17,100	-----------	17,100
6" Two Ply	34,200	34,200	17,100 each	34,200
NOTE: Type 3 & 3F capacities are for each extension.

This is the original Fork Lift Sling design with 2ft. twisted eyes. This sling is less expensive but can be difficult to connect and disconnect from the forks. Also because of the 2 ft. eyes this type does not work well with extra eyes.

Same as Type 1 but with flat eyes.

Flat Pin Eye Slings connected to Fork Sling Hanger Hardware. Made in 4” and 6” widths. This type has
shorter 6” long Pin Eyes. When extra eyes are not in use they stay out of the way. This type can also
be connected or disconnected without pulling sling over the forks, however, the disconnect is a little higher to reach than Type 3.

E-Z Quick Disconnect/Connect Systems. Made in 4” and 6” widths. When slings are used with extensions they can be disconnected or connected quickly and with your feet on the ground. Type 3 eliminates the need for extra eyes (shortening eyes). Slings can be shortened by removing one or two of the extensions and connecting theslings directly to the forks.

Same as Type 3 but made to be used with existing tapered eye slings.

This design has all the great features of our original Type 3 sling, but with a quick disconnect hook.

This can be included with all types of slings.
The disconnect is usually placed 3 ft. off the center of the sling.
4" slings have one/two finger configuration.
6" slings have two/three finger configuration.